Discusses the processing mold matters needing attention and the mold technology

Discusses the processing mold matters needing attention and the mold technology

Automatic device design and production. Specialist manufacturer of precision stamping for consumer electronics, small auto parts and IC packages. Has more than 20 years of die technology, precision stamping technology and management experience, good at die and metal stamping R & D, design, manufacturing, assembly and product production process research. Here to introduce the matters needing attention on the processing of the mold and the mold technology, I hope to be helpful to you.

Mold technology: mold is the mother of products, technology is the father of products. The specific appearance of a product lies in its mother, that is determined by the mold; Every product looks exactly the same because of its father, that is the craft. From this point can explain the importance of process in production management, process is the only magic weapon to ensure the consistency and integrity of mold products. Many of the leading manufacturers are finding that the changing mold industry is leading to increasingly demanding products from demanding consumers. Therefore, how to improve the quality of products is an urgent problem for manufacturers to solve. If we can not understand the importance of the process from the idea, it will not be able to completely guarantee the stability of mold product quality.

Notes for processing molds: check whether the glue position is uniform before processing molds, if not uniform, it will cause shrinkage and affect the appearance. After that, the parting surface and the drawing Angle should be determined. The parting surface chooses the maximum projection on the direction of die opening to simplify as much as possible. As far as possible to select the touch after the die, if you want to touch the front die, easy to walk, affect the appearance, the use of plane contact. Also follow the principle of drawing die, reducing the direction of drawing die. In the mold processing, we should pay attention to the key points of the row. The inclined guide pillar is generally used as the power. The relatively small core-pulling distance is T-shaped groove, and the cylinder core-pulling is greater than 30mm. As far as possible not Po Po marbles force is not large enough, with screw positioning. If there is an inclined top or a thimble under the row position, a reset mechanism should be set, otherwise there may be interference between the row position and the inclined top or the thimble.

The above is the matters needing attention for the processing of the mold and the mold technology. I hope it will be helpful to you. If you want to know more about the mold or have this demand, you are warmly welcome to call for consultation and understanding. We sincerely look forward to working with you to establish a long-term relationship of cooperation, to achieve win-win!